Customized power electrician work clothes need to be systematically planned based on industry characteristics and actual needs, from materials, functions, processes to management processes. The following are the key points and implementation path:
1, Requirement analysis and design phase
.
Job positioning
.
Outdoor repair personnel need to be equipped with anti-static and flame-retardant fabrics, and integrated with reflective strips, tool pockets, and other designs; Office personnel prioritize breathability and comfort.
Copper wire shielding clothing must be used in high-voltage operation scenarios, insulated shoes must meet the 6kV/20kV standard, and all metal accessories must be replaced with plastic materials.
.
Enterprise logo integration
Support embroidery or heat transfer printing of State Grid logo, customizable reflective strip combination logo on cuffs, chest and other positions, and some manufacturers provide free sample confirmation service.
.
2, Production and Quality Control
.
Fabric selection
.
Routine homework: 100% pure cotton or CVC blend, with strong moisture absorption and sweat wicking properties;
High risk environment: Double layer anti scald structure (such as black and white checkered cotton lining), meeting the temperature range of -20 ℃~50 ℃ 37.
Certification requirements: Must pass GB12014-2019 (anti-static) or GB6568-2008 (shielding suit) testing.
.
Process standards
.
Adopting resin zippers, no metal buttons, and elastic cuffs/hem closure design to prevent entanglement with the equipment;
Reflective strip width ≥ 5cm, suture density ≥ 12 stitches/3cm 14.
3, Customization process and after-sales service
.
Full cycle service
.
Measurement: Provide a set of codes or 1-on-1 accurate measurement (with an error of ± 1.5cm) 56;
Delivery: including quality inspection report and certificate of conformity, supporting 7-day unconditional return and exchange.
.
Maintenance management
.
Cleaning frequency ≤ 2 times/week to avoid fabric hardening caused by drying;
Insulation equipment needs to be inspected every 6 months, and the load-bearing capacity of seat belts should be ≥ 150kg.